Atlas Navigator all Cu XLR
Product Information
The Atlas Navigator All Cu (all copper) uses deletion free OCC for both the going and the return conductors and employs a PTFE dielectric together with a cotton yarn filler in order to reduce microphony.
100% rejection of radio frequency interference (RFI) is provided by an OCC braid and a copper mylar shield.
The Navigator is a superior design that is used here for fully balanced systems with Atlas' own design and exclusive audiophile All Cu (all copper) solderless XLR plugs. The copper plug is cold welded or crimped on to the conductors with an air tight seal that avoids the use of solder. Solder presents an unecessary barrier to the signal and at Atlas we believe the finest qualities result from the removal of barriers to the signal such as the use of solder or materials of differing characteristics from the signal carrying conductors, hence the OCC or All Cu plug; it provides more deletion free information.
The Navigator XLR compliments the range of Atlas super interconnects for high quality balanced systems.
Features:
- Symmetrical fully-balanced analogue audio interconnect.
- Double shielded with copper mylar plus close lapped 99.997% pure OCC copper multi-stranded screen providing 100% coverage for the avoidance of RFI
- Cotton filler for reduced microphony
- Twin concentric rope-lay stranded 99.9997% pure OCC copper multi-stranded conductors laid in a twisted fashion to reduce EMI and the effects of increased resistance from the proximity effect
- Polyethylene dielectrics to both conductors
- 8.5mm diameter with a soft PVC jacket
- Direct silver plated OCC copper XLR plugs
- Colour: Purple
Technical Data:
- Resistance (Ohms/m @ 20°C) : 0.0266
- Conductor to screen capacitance (pF/m) : 90.02
- Inter-conductor capacitance (pF/m) : 43.71
- Conductor - screen inductance (µH/m @ 1 kHz) : 0.785
- Conductor - conductor inductance (µH/m @ 1 kHz) : 0.040
Atlas XLR plugs are wired as follows:
Pin 1 = Ground
Pin 2 = Hot
Pin 3 = Cold
